Fitted furniture in Cornwall
Built-in furniture and interior joinery, scribed to walls that are rarely square and finished under workshop conditions. Serving Cornwall and the surrounding area.
- Made to size from a measured survey, never cut down from stock
- FSC-certified timber with chain-of-custody paperwork
- Fixed written quotation with the lead time stated
- 10-year workmanship guarantee in writing
Free measured survey · No obligation · Reply within one working day
Quote for Cornwall
Free survey across the county.
What we see in Cornwall
If you are looking at Fitted Wardrobes in Cornwall, the timber is only half the decision. You will find mostly granite fishermen's cottages, slate-hung terraces and modern coastal builds in this area, and it moves as it ages. The exposure here is the most severe salt and wind exposure in England, which is exactly the condition that causes accelerated coating failure and salt crystallisation damage at glazing lines. In practice that means using the full height so nothing is wasted above the rail.
Each opening is recorded individually, since a terrace of identical houses rarely is. Rough dimensions and a couple of photographs are enough for us to price it properly.
A detail specific to this area: Cornish exposure grades mean specification should assume worst-case wind-driven rain.
Available in Cornwall
All made to size and delivered across the county.
Fitted Wardrobes
Floor to ceiling storage built into the room.
Read more →Home Libraries
Bookcases and study joinery with integrated lighting.
Read more →Media Walls
Concealed cable routes and ventilated equipment bays.
Read more →Boot Rooms and Utility
Hard-wearing storage for the busiest part of the house.
Read more →Timber Wall Panelling
Raised, flat, shaker and slatted panelling.
Read more →Alcove Cabinetry
Built-in units either side of a chimney breast.
Read more →Window Seats and Shutters
Bench seating, storage and solid timber shutters.
Read more →Kitchen Joinery
In-frame doors, larders and dressers in solid timber.
Read more →Nothing in your house is square in Cornwall
Which is the entire reason built-in furniture costs more than flat-pack, and the entire reason it looks better.
We scribe to the wall
Every panel is cut to the actual line of the plaster, so there is no tapering gap running down the side of the unit.
We measure at three heights
Alcoves are routinely 20 to 40mm wider at the bottom than the top. One measurement is how you end up packing the gap out.
We finish off site
Sprayed under workshop conditions, which is a level of finish site application simply cannot reach.
What clients tell us
Feedback collected directly from completed projects. Full written references are available on request before you commit.
“The alcoves were nearly 40mm out top to bottom and you genuinely cannot tell.”
Verified client, Cornwall“Finish is better than anything we have had sprayed on site, and it has stayed that way.”
Verified client, Cornwall“They redesigned the internal layout after asking how we actually store things.”
Verified client, CornwallCornwall questions
Do you cover Cornwall?
Yes. We cover the whole of Cornwall including Truro, Falmouth, Newquay, St Austell and the surrounding villages. Cornish exposure grades mean specification should assume worst-case wind-driven rain. Because the most severe salt and wind exposure in England, we allow for it at survey stage rather than discovering it on the day.
Will the finish need maintaining?
A factory-applied microporous finish typically needs inspection every three to five years, sooner on exposed coastal elevations. Maintaining it is far cheaper than letting a coating fail and the timber take up water.
Do you fit, or supply only?
Both. Supply-only is common for trade and contractor clients. For private clients we usually recommend supply and fit, because responsibility for the fit and the finish then sits in one place.
What if the opening is out of square?
Most older openings are. The survey records the actual dimensions at several points and the unit is manufactured to suit, which is the main reason we survey rather than work from the sizes given over the phone.
Can you work on a listed building?
Yes, and a significant share of our work is listed or conservation area. We can supply drawings and section details to support a listed building consent or planning application, though the consent itself remains the owner's responsibility.
Can you match an existing profile?
Yes. If you can supply a section, a photograph with a rule in shot, or an old unit, we can replicate the profile. For conservation work this is usually the condition the planning officer will apply.
Talk to us about your project
Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.
Request a quote Call 0800 088 6248