Skip to content
Timber Joinery Company Timber Joinery Company Crafted with care · Built to last
Timber Joinery Company

Boot Rooms and Utility, made to size

Hard-wearing storage for the busiest part of the house. Built-in furniture and interior joinery, scribed to walls that are rarely square and finished under workshop conditions.

  • Made to size from a measured survey, never cut down from stock
  • FSC-certified timber with chain-of-custody paperwork
  • Fixed written quotation with the lead time stated
  • 10-year workmanship guarantee in writing

Free measured survey · No obligation · Reply within one working day

Price this up

Tell us sizes and we will quote in writing.

Free, no-obligation. We reply within one working day.

10-year workmanship guaranteeFree measured surveyFSC-certified timberUK-wide deliveryFixed-price quotations

What we do and how we do it

What makes Boot Rooms and Utility work in the UK is usually invisible once it is finished. Local property is overwhelmingly a mix of period and modern stock, which is why we never quote from a catalogue. Then there is the full range of UK exposure conditions, which reliably produces coating failure followed by rot at the joints given enough seasons. Where we put the effort is surfaces and finishes that survive wet coats and muddy boots.

Each opening is recorded individually, since a terrace of identical houses rarely is. One call is usually enough for us to tell you roughly where the price will land.

Local factor worth flagging early: specification should always be matched to local exposure.

Specification

  • Engineered hardwood or slow-grown softwood, FSC certified
  • Factory-applied microporous finish in any RAL or heritage colour
  • Sealed units, slim-cavity units or single glazing with putty line
  • Manufactured to survey dimensions, not to a stock size chart
  • Delivered UK-wide with chain-of-custody paperwork

Nothing in your house is square

Which is the entire reason built-in furniture costs more than flat-pack, and the entire reason it looks better.

01

We scribe to the wall

Every panel is cut to the actual line of the plaster, so there is no tapering gap running down the side of the unit.

02

We measure at three heights

Alcoves are routinely 20 to 40mm wider at the bottom than the top. One measurement is how you end up packing the gap out.

03

We finish off site

Sprayed under workshop conditions, which is a level of finish site application simply cannot reach.

Scribed to your walls

Nothing is square in a real house. Everything is fitted to what is actually there.

Workshop finished

Sprayed under controlled conditions, which no site application can match.

Solid timber and veneer

Specified to suit the piece rather than to suit our stock list.

10-year guarantee

Covering the carcass, the doors and the finish.

★★★★★

What clients tell us

Feedback collected directly from completed projects. Full written references are available on request before you commit.

“The alcoves were nearly 40mm out top to bottom and you genuinely cannot tell.”

Verified client, UK-wide

“Finish is better than anything we have had sprayed on site, and it has stayed that way.”

Verified client, UK-wide

“They redesigned the internal layout after asking how we actually store things.”

Verified client, UK-wide

What happens next

Four steps from first call to installed joinery. No pressure at any stage.

  1. Design visit

    We measure the room and talk through how you actually use it.

  2. Layout and finish

    Drawings and finish samples before anything is committed.

  3. Workshop build

    Made and finished off site, so your house stays liveable.

  4. Installation

    Fitted and scribed in, usually within a couple of days.

Frequently asked questions

How long does a typical order take?

Most made-to-size orders run six to ten weeks from survey to delivery. Conservation and heavily detailed work can take longer, and we confirm the lead time in writing at quotation rather than leaving it open.

Will the finish need maintaining?

A factory-applied microporous finish typically needs inspection every three to five years, sooner on exposed coastal elevations. Maintaining it is far cheaper than letting a coating fail and the timber take up water.

What guarantee do you provide?

Ten years on workmanship, covering manufacture and the factory-applied finish. Where we install, the installation is covered too. It is issued in writing with the handover paperwork.

Do you work in hardwood or softwood?

Both. Engineered hardwood is the default where movement or exposure is a concern, and slow-grown softwood is often the better value choice for painted work in sheltered positions. We will tell you which we would specify and why.

Do you deliver nationwide?

Yes, we deliver across England, Wales and Scotland. Delivery is priced into the quotation so there is no separate charge added later.

Do you take a deposit?

Not before the measured survey. A deposit is only requested once the survey is complete and you have approved the final schedule and price.

Can you match an existing profile?

Yes. If you can supply a section, a photograph with a rule in shot, or an old unit, we can replicate the profile. For conservation work this is usually the condition the planning officer will apply.

Talk to us about your project

Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.

Request a quote Call 0800 088 6248
Call 0800 088 6248 Get a quote