Fitted furniture in Shaftesbury
Built-in furniture and interior joinery, scribed to walls that are rarely square and finished under workshop conditions. Covering Shaftesbury and the wider Dorset area.
- Made to size from a measured survey, never cut down from stock
- FSC-certified timber with chain-of-custody paperwork
- Fixed written quotation with the lead time stated
- 10-year workmanship guarantee in writing
Free measured survey · No obligation · Reply within one working day
Quote for Shaftesbury
Free measured survey in Shaftesbury.
Fitted furniture in Shaftesbury
Most Boot Rooms and Utility enquiries we take in Shaftesbury start with an opening that is not a standard size. Around here it is Purbeck stone cottages, Victorian resort villas and thatched inland villages, and that alone rules out anything bought by the pallet. Set against exposed Channel coast with intense salt and UV load, most joinery here eventually shows rapid finish failure and fixings corrosion within a few seasons on seafront stock. This is really a job about surfaces and finishes that survive wet coats and muddy boots.
A surveyor visits first and records the real dimensions, at several points on each opening. Send what you have, even if it is only a phone photo, and we will take it from there.
Local factor worth flagging early: Jurassic Coast properties need stainless fixings as standard, not an upgrade.
What we cover locally
- Fitted Wardrobes in Shaftesbury
- Home Libraries in Shaftesbury
- Media Walls in Shaftesbury
- Boot Rooms and Utility in Shaftesbury
Survey visits in Shaftesbury are usually booked within a week. There is no charge for the survey and no obligation to proceed.
Made to size for Shaftesbury
Every item below is manufactured to your dimensions.
Fitted Wardrobes
Floor to ceiling storage built into the room.
Read more →Home Libraries
Bookcases and study joinery with integrated lighting.
Read more →Media Walls
Concealed cable routes and ventilated equipment bays.
Read more →Boot Rooms and Utility
Hard-wearing storage for the busiest part of the house.
Read more →Timber Wall Panelling
Raised, flat, shaker and slatted panelling.
Read more →Alcove Cabinetry
Built-in units either side of a chimney breast.
Read more →Window Seats and Shutters
Bench seating, storage and solid timber shutters.
Read more →Kitchen Joinery
In-frame doors, larders and dressers in solid timber.
Read more →Nothing in your house is square in Shaftesbury
Which is the entire reason built-in furniture costs more than flat-pack, and the entire reason it looks better.
We scribe to the wall
Every panel is cut to the actual line of the plaster, so there is no tapering gap running down the side of the unit.
We measure at three heights
Alcoves are routinely 20 to 40mm wider at the bottom than the top. One measurement is how you end up packing the gap out.
We finish off site
Sprayed under workshop conditions, which is a level of finish site application simply cannot reach.
What clients tell us
Feedback collected directly from completed projects. Full written references are available on request before you commit.
“The alcoves were nearly 40mm out top to bottom and you genuinely cannot tell.”
Verified client, Dorset“Finish is better than anything we have had sprayed on site, and it has stayed that way.”
Verified client, Dorset“They redesigned the internal layout after asking how we actually store things.”
Verified client, DorsetShaftesbury questions
How do you handle glazing?
Standard double glazed units for most work, and slim-cavity units where a conservation officer has restricted sightlines. Single glazing with putty lines is available where the consent requires it.
What guarantee do you provide?
Ten years on workmanship, covering manufacture and the factory-applied finish. Where we install, the installation is covered too. It is issued in writing with the handover paperwork.
Can you match an existing profile?
Yes. If you can supply a section, a photograph with a rule in shot, or an old unit, we can replicate the profile. For conservation work this is usually the condition the planning officer will apply.
What if the opening is out of square?
Most older openings are. The survey records the actual dimensions at several points and the unit is manufactured to suit, which is the main reason we survey rather than work from the sizes given over the phone.
Will the finish need maintaining?
A factory-applied microporous finish typically needs inspection every three to five years, sooner on exposed coastal elevations. Maintaining it is far cheaper than letting a coating fail and the timber take up water.
Talk to us about your project
Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.
Request a quote Call 0800 088 6248