Fitted furniture in Greater London
Built-in furniture and interior joinery, scribed to walls that are rarely square and finished under workshop conditions. Serving Greater London and the surrounding area.
- Made to size from a measured survey, never cut down from stock
- FSC-certified timber with chain-of-custody paperwork
- Fixed written quotation with the lead time stated
- 10-year workmanship guarantee in writing
Free measured survey · No obligation · Reply within one working day
Quote for Greater London
Free survey across the county.
What we see in Greater London
If you are looking at Fitted Wardrobes in Greater London, the timber is only half the decision. With Victorian and Edwardian terraces, mansion blocks and post-war infill making up much of the area, off-the-shelf sizes rarely line up. Add high pollution load and sheltered urban humidity to that and paint failure on south-facing sashes and rot at the bottom rail becomes the usual trigger for replacement. This is really a job about using the full height so nothing is wasted above the rail.
A surveyor visits first and records the real dimensions, at several points on each opening. Rough dimensions and a couple of photographs are enough for us to price it properly.
Local factor worth flagging early: large numbers of properties sit in conservation areas with like-for-like replacement conditions.
Available in Greater London
All made to size and delivered across the county.
Fitted Wardrobes
Floor to ceiling storage built into the room.
Read more →Home Libraries
Bookcases and study joinery with integrated lighting.
Read more →Media Walls
Concealed cable routes and ventilated equipment bays.
Read more →Boot Rooms and Utility
Hard-wearing storage for the busiest part of the house.
Read more →Timber Wall Panelling
Raised, flat, shaker and slatted panelling.
Read more →Alcove Cabinetry
Built-in units either side of a chimney breast.
Read more →Window Seats and Shutters
Bench seating, storage and solid timber shutters.
Read more →Kitchen Joinery
In-frame doors, larders and dressers in solid timber.
Read more →Nothing in your house is square in Greater London
Which is the entire reason built-in furniture costs more than flat-pack, and the entire reason it looks better.
We scribe to the wall
Every panel is cut to the actual line of the plaster, so there is no tapering gap running down the side of the unit.
We measure at three heights
Alcoves are routinely 20 to 40mm wider at the bottom than the top. One measurement is how you end up packing the gap out.
We finish off site
Sprayed under workshop conditions, which is a level of finish site application simply cannot reach.
What clients tell us
Feedback collected directly from completed projects. Full written references are available on request before you commit.
“The alcoves were nearly 40mm out top to bottom and you genuinely cannot tell.”
Verified client, Greater London“Finish is better than anything we have had sprayed on site, and it has stayed that way.”
Verified client, Greater London“They redesigned the internal layout after asking how we actually store things.”
Verified client, Greater LondonGreater London questions
Do you cover Greater London?
Yes. We cover the whole of Greater London including Croydon, Bromley, Ealing, Enfield and the surrounding villages. Large numbers of properties sit in conservation areas with like-for-like replacement conditions. Because high pollution load and sheltered urban humidity, we allow for it at survey stage rather than discovering it on the day.
What guarantee do you provide?
Ten years on workmanship, covering manufacture and the factory-applied finish. Where we install, the installation is covered too. It is issued in writing with the handover paperwork.
Will the finish need maintaining?
A factory-applied microporous finish typically needs inspection every three to five years, sooner on exposed coastal elevations. Maintaining it is far cheaper than letting a coating fail and the timber take up water.
How long does a typical order take?
Most made-to-size orders run six to ten weeks from survey to delivery. Conservation and heavily detailed work can take longer, and we confirm the lead time in writing at quotation rather than leaving it open.
Do you fit, or supply only?
Both. Supply-only is common for trade and contractor clients. For private clients we usually recommend supply and fit, because responsibility for the fit and the finish then sits in one place.
How do you handle glazing?
Standard double glazed units for most work, and slim-cavity units where a conservation officer has restricted sightlines. Single glazing with putty lines is available where the consent requires it.
Talk to us about your project
Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.
Request a quote Call 0800 088 6248